
| Parameter | Value |
|---|---|
| Orderable part number | SDCH1V5040-3R3M-R |
| Inductance | 3.3 uH ±20% |
| FLL minimum (at Isat) | 1.72 uH |
| DCR typical @ +20 °C | 28 mOhm |
| DCR maximum @ +20 °C | 32 mOhm |
| Irms (DC, 40 °C rise) | 4 A |
| Isat | 4.2 A |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1033 |

Drawing reproduced from Eaton Technical Data ELX1033: outline with
rated mm dimensions, pad layout and marking.
A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.
At 4 A the winding dissipates about 0.448 W in copper using the typical DCR of 28 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 29.1 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SDCH1V5040 family this is value 4 of 17, in a range from 1 uH to 680 uH.
The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.
How much shielding does semi-shielded give?
Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.
Can it be used in an automotive module?
The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.
Is the inductance stable with temperature?
The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd