
| Parameter | Value |
|---|---|
| Orderable part number | SDCH1V5040-4R7M-R |
| Inductance | 4.7 uH ±20% |
| FLL minimum (at Isat) | 2.44 uH |
| DCR typical @ +20 °C | 34 mOhm |
| DCR maximum @ +20 °C | 39 mOhm |
| Irms (DC, 40 °C rise) | 3.1 A |
| Isat | 3.5 A |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1033 |

Drawing reproduced from Eaton Technical Data ELX1033: outline with
rated mm dimensions, pad layout and marking.
This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.
At 3.1 A the winding dissipates about 0.327 W in copper using the typical DCR of 34 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 28.8 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SDCH1V5040 family this is value 5 of 17, in a range from 1 uH to 680 uH.
The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.
How much shielding does semi-shielded give?
Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.
How much shielding does semi-shielded give?
Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.
How much shielding does semi-shielded give?
Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd