Eaton SDCH1V6045-100M-R 10 uH SMD Inductor, Isat 4.5 A
Eaton SDCH1V6045-100M-R 10 uH SMD Inductor, Isat 4.5 A

Eaton SDCH1V6045-100M-R 10 uH SMD Inductor, Isat 4.5 A

Share
SDCH1V6045-100M-R: semi-shielded power inductor, 10 uH ±20%, 2.4 A Irms, Isat 4.5 A, DCR 58 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-100M-R 10 uH SMD Inductor, Isat 4.5 A

    SDCH1V6045-100M-R at a glance: semi-shielded power inductor, 10 uH ±20%, 2.4 A Irms, Isat 4.5 A, DCR 58 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCH1V6045-100M-R
    Inductance10 uH ±20%
    FLL minimum (at Isat)5.2 uH
    DCR typical @ +20 °C58 mOhm
    DCR maximum @ +20 °C67 mOhm
    Irms (DC, 40 °C rise)2.4 A
    Isat4.5 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Dimensions and Pad Layout

    SDCH1V6045-100M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 2.4 A the winding dissipates about 0.334 W in copper using the typical DCR of 58 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 101 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 7 of 19, in a range from 1 uH to 1000 uH.

    Positioning in the Range

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products