Eaton SDCH1V6045-101M-R 100 uH Power Inductor 550 mOhm
Eaton SDCH1V6045-101M-R 100 uH Power Inductor 550 mOhm

Eaton SDCH1V6045-101M-R 100 uH Power Inductor 550 mOhm

Share
SDCH1V6045-101M-R: semi-shielded power inductor, 100 uH ±20%, 0.8 A Irms, Isat 1.45 A, DCR 550 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-101M-R 100 uH Power Inductor 550 mOhm

    SDCH1V6045-101M-R at a glance: semi-shielded power inductor, 100 uH ±20%, 0.8 A Irms, Isat 1.45 A, DCR 550 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCH1V6045-101M-R
    Inductance100 uH ±20%
    FLL minimum (at Isat)52 uH
    DCR typical @ +20 °C550 mOhm
    DCR maximum @ +20 °C633 mOhm
    Irms (DC, 40 °C rise)0.8 A
    Isat1.45 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Outline Drawing

    SDCH1V6045-101M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 0.8 A the winding dissipates about 0.352 W in copper using the typical DCR of 550 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 105 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 13 of 19, in a range from 1 uH to 1000 uH.

    Where This Series Fits

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products