Eaton SDCH1V6045-1R0N-R 1 uH Power Inductor 12 mOhm
Eaton SDCH1V6045-1R0N-R 1 uH Power Inductor 12 mOhm

Eaton SDCH1V6045-1R0N-R 1 uH Power Inductor 12 mOhm

Share
SDCH1V6045-1R0N-R: semi-shielded power inductor, 1 uH ±30%, 6 A Irms, Isat 12.8 A, DCR 12 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-1R0N-R 1 uH Power Inductor 12 mOhm

    SDCH1V6045-1R0N-R at a glance: semi-shielded power inductor, 1 uH ±30%, 6 A Irms, Isat 12.8 A, DCR 12 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCH1V6045-1R0N-R
    Inductance1 uH ±30%
    FLL minimum (at Isat)0.46 uH
    DCR typical @ +20 °C12 mOhm
    DCR maximum @ +20 °C15 mOhm
    Irms (DC, 40 °C rise)6 A
    Isat12.8 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Mechanical Drawing

    SDCH1V6045-1R0N-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 6 A the winding dissipates about 0.432 W in copper using the typical DCR of 12 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 81.9 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 1 of 19, in a range from 1 uH to 1000 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products