Eaton SDCH1V6045-2R2M-R 2.2 uH SMD Inductor, Isat 9 A
Eaton SDCH1V6045-2R2M-R 2.2 uH SMD Inductor, Isat 9 A

Eaton SDCH1V6045-2R2M-R 2.2 uH SMD Inductor, Isat 9 A

Share
SDCH1V6045-2R2M-R: semi-shielded power inductor, 2.2 uH ±20%, 4.5 A Irms, Isat 9 A, DCR 19 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-2R2M-R 2.2 uH SMD Inductor, Isat 9 A

    SDCH1V6045-2R2M-R at a glance: semi-shielded power inductor, 2.2 uH ±20%, 4.5 A Irms, Isat 9 A, DCR 19 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCH1V6045-2R2M-R
    Inductance2.2 uH ±20%
    FLL minimum (at Isat)1.14 uH
    DCR typical @ +20 °C19 mOhm
    DCR maximum @ +20 °C22 mOhm
    Irms (DC, 40 °C rise)4.5 A
    Isat9 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Outline Drawing

    SDCH1V6045-2R2M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 4.5 A the winding dissipates about 0.385 W in copper using the typical DCR of 19 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 89.1 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 3 of 19, in a range from 1 uH to 1000 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products