Eaton SDCH1V6045-331M-R 330 uH SMD Inductor, Isat 0.8 A
Eaton SDCH1V6045-331M-R 330 uH SMD Inductor, Isat 0.8 A

Eaton SDCH1V6045-331M-R 330 uH SMD Inductor, Isat 0.8 A

Share
SDCH1V6045-331M-R: semi-shielded power inductor, 330 uH ±20%, 0.4 A Irms, Isat 0.8 A, DCR 2000 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V6045-331M-R 330 uH SMD Inductor, Isat 0.8 A

    SDCH1V6045-331M-R at a glance: semi-shielded power inductor, 330 uH ±20%, 0.4 A Irms, Isat 0.8 A, DCR 2000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCH1V6045-331M-R
    Inductance330 uH ±20%
    FLL minimum (at Isat)172 uH
    DCR typical @ +20 °C2000 mOhm
    DCR maximum @ +20 °C2300 mOhm
    Irms (DC, 40 °C rise)0.4 A
    Isat0.8 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1034

    Mechanical Dimensions & Pad Layout

    SDCH1V6045-331M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1034: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 0.4 A the winding dissipates about 0.32 W in copper using the typical DCR of 2000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 106 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V6045 family this is value 15 of 19, in a range from 1 uH to 1000 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message