Eaton SDCH1V8040-221M-R 220 uH SMD Inductor, Isat 0.9 A
Eaton SDCH1V8040-221M-R 220 uH SMD Inductor, Isat 0.9 A

Eaton SDCH1V8040-221M-R 220 uH SMD Inductor, Isat 0.9 A

Share
SDCH1V8040-221M-R: semi-shielded power inductor, 220 uH ±20%, 0.75 A Irms, Isat 0.9 A, DCR 680 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V8040-221M-R 220 uH SMD Inductor, Isat 0.9 A

    SDCH1V8040-221M-R at a glance: semi-shielded power inductor, 220 uH ±20%, 0.75 A Irms, Isat 0.9 A, DCR 680 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSDCH1V8040-221M-R
    Inductance220 uH ±20%
    FLL minimum (at Isat)114 uH
    DCR typical @ +20 °C680 mOhm
    DCR maximum @ +20 °C782 mOhm
    Irms (DC, 40 °C rise)0.75 A
    Isat0.9 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1035

    Outline Drawing

    SDCH1V8040-221M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1035: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 0.75 A the winding dissipates about 0.383 W in copper using the typical DCR of 680 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 89.1 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V8040 family this is value 14 of 19, in a range from 1 uH to 1000 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products