Eaton SDCH1V8040-821M-R 820 uH SMD Inductor, Isat 0.45 A
Eaton SDCH1V8040-821M-R 820 uH SMD Inductor, Isat 0.45 A

Eaton SDCH1V8040-821M-R 820 uH SMD Inductor, Isat 0.45 A

Share
SDCH1V8040-821M-R: semi-shielded power inductor, 820 uH ±20%, 0.4 A Irms, Isat 0.45 A, DCR 2500 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V8040-821M-R 820 uH SMD Inductor, Isat 0.45 A

    SDCH1V8040-821M-R at a glance: semi-shielded power inductor, 820 uH ±20%, 0.4 A Irms, Isat 0.45 A, DCR 2500 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCH1V8040-821M-R
    Inductance820 uH ±20%
    FLL minimum (at Isat)426 uH
    DCR typical @ +20 °C2500 mOhm
    DCR maximum @ +20 °C2875 mOhm
    Irms (DC, 40 °C rise)0.4 A
    Isat0.45 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1035

    Dimensions and Pad Layout

    SDCH1V8040-821M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1035: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 0.4 A the winding dissipates about 0.4 W in copper using the typical DCR of 2500 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 83 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V8040 family this is value 18 of 19, in a range from 1 uH to 1000 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products