Eaton SDCHA1V5020-100-R 10 uH AEC-Q200 Inductor, 1.6 A
Eaton SDCHA1V5020-100-R 10 uH AEC-Q200 Inductor, 1.6 A

Eaton SDCHA1V5020-100-R 10 uH AEC-Q200 Inductor, 1.6 A

Share
SDCHA1V5020-100-R: AEC-Q200 semi-shielded inductor, 10 uH ±20%, 1.6 A Irms, Isat 1.7 A, DCR 110 mOhm.
    • Product Details
    • Download

    Eaton SDCHA1V5020-100-R 10 uH AEC-Q200 Inductor, 1.6 A

    SDCHA1V5020-100-R at a glance: AEC-Q200 semi-shielded inductor, 10 uH ±20%, 1.6 A Irms, Isat 1.7 A, DCR 110 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCHA1V5020-100-R
    Inductance10 uH ±20%
    FLL minimum (at Isat)5.6 uH
    DCR typical @ +20 °C110 mOhm
    Irms (DC, 40 °C rise)1.6 A
    Isat1.7 A
    SRF typical38 MHz
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1095

    Mechanical Drawing

    SDCHA1V5020-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1095: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    A semi-shielded SMD inductor with automotive qualification. The data sheet quotes OCL, FLL, Irms, Isat, DCR and SRF, which is enough to close a converter design without extra characterisation.

    At 1.6 A the winding dissipates about 0.282 W in copper using the typical DCR of 110 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 14.4 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 38 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the SDCHA1V5020 family this is value 9 of 11, in a range from 1 uH to 22 uH.

    Positioning in the Range

    The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.

    • Qualification covers the part, not the module. The thermal design of the board is still the engineer’s job.
    • Typical applications: led lighting; advanced driver assistance systems (adas); adaptive cruise control (acc); collision avoidance; infotainment and cluster electronics.
    • Design note: use the maximum DCR at the hot corner for the loss budget, and Isat at the same temperature for the transient.

    Frequently Asked Questions

    What does AEC-Q200 cover?
    The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.

    What is the FLL column for?
    Full-load inductance at saturation current. Use it for the ripple calculation at maximum load rather than the zero-bias value.

    Is the part fully shielded?
    It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message