
| Parameter | Value |
|---|---|
| Orderable part number | SDCHA1V5040-4R7-R |
| Inductance | 4.7 uH ±20% |
| FLL minimum (at Isat) | 2.63 uH |
| DCR typical @ +20 °C | 32 mOhm |
| Irms (DC, 40 °C rise) | 3.2 A |
| Isat | 3.9 A |
| SRF typical | 36 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1095 |

Drawing reproduced from Eaton Technical Data ELX1095: outline with
rated mm dimensions, pad layout and marking.
Automotive DC-DC stages ask for qualified construction and predictable saturation at the hot corner. This family provides both, with a semi-shielded body that keeps the profile low and the DCR moderate.
At 3.2 A the winding dissipates about 0.328 W in copper using the typical DCR of 32 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 35.7 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 36 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the SDCHA1V5040 family this is value 5 of 9, in a range from 1 uH to 22 uH.
The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
What is the FLL column for?
Full-load inductance at saturation current. Use it for the ripple calculation at maximum load rather than the zero-bias value.
What does AEC-Q200 cover?
The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd