
| Parameter | Value |
|---|---|
| Orderable part number | SDCHA1V6045-1R5-R |
| Inductance | 1.5 uH ±20% |
| FLL minimum (at Isat) | 0.84 uH |
| DCR typical @ +20 °C | 11.7 mOhm |
| Irms (DC, 40 °C rise) | 7 A |
| Isat | 12 A |
| SRF typical | 75 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1096 |

Drawing reproduced from Eaton Technical Data ELX1096: outline with
rated mm dimensions, pad layout and marking.
The automotive version of the semi-shielded power inductor: AEC-Q200 qualified, characterised over the full temperature range, and built with a magnetic resin shield that keeps radiated emissions low in a dense module.
At 7 A the winding dissipates about 0.573 W in copper using the typical DCR of 11.7 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 108 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 75 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the SDCHA1V6045 family this is value 3 of 20, in a range from 1 uH to 100 uH.
The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.
How do I check the hot corner?
Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.
Is the part fully shielded?
It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.
How do I check the hot corner?
Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd