Eaton SDCHA1V6045-8R2-R 8.2 uH Semi-Shielded Automotive Inductor
Eaton SDCHA1V6045-8R2-R 8.2 uH Semi-Shielded Automotive Inductor

Eaton SDCHA1V6045-8R2-R 8.2 uH Semi-Shielded Automotive Inductor

Share
SDCHA1V6045-8R2-R: AEC-Q200 semi-shielded inductor, 8.2 uH ±20%, 3.4 A Irms, Isat 5.1 A, DCR 46 mOhm.
    • Product Details
    • Download

    Eaton SDCHA1V6045-8R2-R 8.2 uH Semi-Shielded Automotive Inductor

    SDCHA1V6045-8R2-R at a glance: AEC-Q200 semi-shielded inductor, 8.2 uH ±20%, 3.4 A Irms, Isat 5.1 A, DCR 46 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCHA1V6045-8R2-R
    Inductance8.2 uH ±20%
    FLL minimum (at Isat)4.59 uH
    DCR typical @ +20 °C46 mOhm
    Irms (DC, 40 °C rise)3.4 A
    Isat5.1 A
    SRF typical27 MHz
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1096

    Mechanical Dimensions & Pad Layout

    SDCHA1V6045-8R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1096: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This part is used on body electronics and ADAS power rails where the inductor has to be qualified, shielded enough for EMC, and small enough to fit beside the regulator.

    At 3.4 A the winding dissipates about 0.532 W in copper using the typical DCR of 46 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 107 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 27 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the SDCHA1V6045 family this is value 11 of 20, in a range from 1 uH to 100 uH.

    Where This Series Fits

    The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.

    • Qualification covers the part, not the module. The thermal design of the board is still the engineer’s job.
    • Typical applications: led lighting; advanced driver assistance systems (adas); adaptive cruise control (acc); collision avoidance; infotainment and cluster electronics.
    • Design note: use the maximum DCR at the hot corner for the loss budget, and Isat at the same temperature for the transient.

    Frequently Asked Questions

    Is the part fully shielded?
    It is semi-shielded: a magnetic resin over the winding. That is adequate for most module layouts but is not a closed metal shield.

    What does AEC-Q200 cover?
    The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.

    What does AEC-Q200 cover?
    The passive-component qualification regime: thermal shock, cycling, vibration, moisture and solderability. It qualifies the construction, not the board design.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products