Eaton SDCHA1V8040-4R7-R 4.7 uH Automotive Inductor 19.5 mOhm
Eaton SDCHA1V8040-4R7-R 4.7 uH Automotive Inductor 19.5 mOhm

Eaton SDCHA1V8040-4R7-R 4.7 uH Automotive Inductor 19.5 mOhm

Share
SDCHA1V8040-4R7-R: AEC-Q200 semi-shielded inductor, 4.7 uH ±20%, 5.8 A Irms, Isat 6.7 A, DCR 19.5 mOhm.
    • Product Details
    • Download

    Eaton SDCHA1V8040-4R7-R 4.7 uH Automotive Inductor 19.5 mOhm

    SDCHA1V8040-4R7-R at a glance: AEC-Q200 semi-shielded inductor, 4.7 uH ±20%, 5.8 A Irms, Isat 6.7 A, DCR 19.5 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCHA1V8040-4R7-R
    Inductance4.7 uH ±20%
    FLL minimum (at Isat)2.63 uH
    DCR typical @ +20 °C19.5 mOhm
    Irms (DC, 40 °C rise)5.8 A
    Isat6.7 A
    SRF typical38 MHz
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1097

    Outline Drawing

    SDCHA1V8040-4R7-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1097: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    A semi-shielded SMD inductor with automotive qualification. The data sheet quotes OCL, FLL, Irms, Isat, DCR and SRF, which is enough to close a converter design without extra characterisation.

    At 5.8 A the winding dissipates about 0.656 W in copper using the typical DCR of 19.5 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 105 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 38 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the SDCHA1V8040 family this is value 5 of 16, in a range from 1 uH to 100 uH.

    Positioning in the Range

    The SDCA family is the automotive semi-shielded range: the same construction as the commercial parts, qualified to AEC-Q200 and characterised across the temperature range.

    • Qualification covers the part, not the module. The thermal design of the board is still the engineer’s job.
    • Typical applications: led lighting; advanced driver assistance systems (adas); adaptive cruise control (acc); collision avoidance; infotainment and cluster electronics.
    • Design note: use the maximum DCR at the hot corner for the loss budget, and Isat at the same temperature for the transient.

    Frequently Asked Questions

    How do I check the hot corner?
    Use Isat at the highest operating temperature and the maximum DCR at that temperature. The room-temperature row is the optimistic one.

    What is the FLL column for?
    Full-load inductance at saturation current. Use it for the ripple calculation at maximum load rather than the zero-bias value.

    What is the FLL column for?
    Full-load inductance at saturation current. Use it for the ripple calculation at maximum load rather than the zero-bias value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products