Eaton SDCL1V2010-1R5N-R 1.5 uH SMD Inductor, Isat 1.5 A
Eaton SDCL1V2010-1R5N-R 1.5 uH SMD Inductor, Isat 1.5 A

Eaton SDCL1V2010-1R5N-R 1.5 uH SMD Inductor, Isat 1.5 A

Share
SDCL1V2010-1R5N-R: semi-shielded power inductor, 1.5 uH ±30%, 1.3 A Irms, Isat 1.5 A, DCR 135 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V2010-1R5N-R 1.5 uH SMD Inductor, Isat 1.5 A

    SDCL1V2010-1R5N-R at a glance: semi-shielded power inductor, 1.5 uH ±30%, 1.3 A Irms, Isat 1.5 A, DCR 135 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCL1V2010-1R5N-R
    Inductance1.5 uH ±30%
    FLL minimum (at Isat)0.68 uH
    DCR typical @ +20 °C135 mOhm
    DCR maximum @ +20 °C156 mOhm
    Irms (DC, 40 °C rise)1.3 A
    Isat1.5 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1029

    Mechanical Dimensions & Pad Layout

    SDCL1V2010-1R5N-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1029: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 1.3 A the winding dissipates about 0.228 W in copper using the typical DCR of 135 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 1.69 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V2010 family this is value 4 of 10, in a range from 0.47 uH to 15 uH.

    Positioning in the Range

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products