Eaton SDCL1V2510-150M-R 15 uH SMD Inductor, Isat 0.55 A
Eaton SDCL1V2510-150M-R 15 uH SMD Inductor, Isat 0.55 A

Eaton SDCL1V2510-150M-R 15 uH SMD Inductor, Isat 0.55 A

Share
SDCL1V2510-150M-R: semi-shielded power inductor, 15 uH ±20%, 0.45 A Irms, Isat 0.55 A, DCR 650 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V2510-150M-R 15 uH SMD Inductor, Isat 0.55 A

    SDCL1V2510-150M-R at a glance: semi-shielded power inductor, 15 uH ±20%, 0.45 A Irms, Isat 0.55 A, DCR 650 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V2510-150M-R
    Inductance15 uH ±20%
    FLL minimum (at Isat)7.8 uH
    DCR typical @ +20 °C650 mOhm
    DCR maximum @ +20 °C750 mOhm
    Irms (DC, 40 °C rise)0.45 A
    Isat0.55 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1030

    Mechanical Drawing

    SDCL1V2510-150M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1030: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 0.45 A the winding dissipates about 0.132 W in copper using the typical DCR of 650 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 2.27 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V2510 family this is value 10 of 10, in a range from 0.47 uH to 15 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products