Eaton SDCL1V2512-4R7M-R 4.7 uH Power Inductor 205 mOhm
Eaton SDCL1V2512-4R7M-R 4.7 uH Power Inductor 205 mOhm

Eaton SDCL1V2512-4R7M-R 4.7 uH Power Inductor 205 mOhm

Share
SDCL1V2512-4R7M-R: semi-shielded power inductor, 4.7 uH ±20%, 1.1 A Irms, Isat 1.35 A, DCR 205 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V2512-4R7M-R 4.7 uH Power Inductor 205 mOhm

    SDCL1V2512-4R7M-R at a glance: semi-shielded power inductor, 4.7 uH ±20%, 1.1 A Irms, Isat 1.35 A, DCR 205 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSDCL1V2512-4R7M-R
    Inductance4.7 uH ±20%
    FLL minimum (at Isat)2.44 uH
    DCR typical @ +20 °C205 mOhm
    DCR maximum @ +20 °C236 mOhm
    Irms (DC, 40 °C rise)1.1 A
    Isat1.35 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1030

    Mechanical Dimensions & Pad Layout

    SDCL1V2512-4R7M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1030: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 1.1 A the winding dissipates about 0.248 W in copper using the typical DCR of 205 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 4.28 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V2512 family this is value 8 of 12, in a range from 0.33 uH to 22 uH.

    Where This Series Fits

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products