Eaton SDCL1V4018-680M-R 68 uH Power Inductor 1000 mOhm
Eaton SDCL1V4018-680M-R 68 uH Power Inductor 1000 mOhm

Eaton SDCL1V4018-680M-R 68 uH Power Inductor 1000 mOhm

Share
SDCL1V4018-680M-R: semi-shielded power inductor, 68 uH ±20%, 0.5 A Irms, Isat 0.55 A, DCR 1000 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4018-680M-R 68 uH Power Inductor 1000 mOhm

    SDCL1V4018-680M-R at a glance: semi-shielded power inductor, 68 uH ±20%, 0.5 A Irms, Isat 0.55 A, DCR 1000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V4018-680M-R
    Inductance68 uH ±20%
    FLL minimum (at Isat)35.4 uH
    DCR typical @ +20 °C1000 mOhm
    DCR maximum @ +20 °C1150 mOhm
    Irms (DC, 40 °C rise)0.5 A
    Isat0.55 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Outline Drawing

    SDCL1V4018-680M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 0.5 A the winding dissipates about 0.25 W in copper using the typical DCR of 1000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 10.3 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4018 family this is value 12 of 14, in a range from 1 uH to 220 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products