Eaton SDCL1V4020-3R3M-R 3.3 uH Semi-Shielded Inductor, 3.5 A
Eaton SDCL1V4020-3R3M-R 3.3 uH Semi-Shielded Inductor, 3.5 A

Eaton SDCL1V4020-3R3M-R 3.3 uH Semi-Shielded Inductor, 3.5 A

Share
SDCL1V4020-3R3M-R: semi-shielded power inductor, 3.3 uH ±20%, 3.5 A Irms, Isat 4.7 A, DCR 65 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4020-3R3M-R 3.3 uH Semi-Shielded Inductor, 3.5 A

    SDCL1V4020-3R3M-R at a glance: semi-shielded power inductor, 3.3 uH ±20%, 3.5 A Irms, Isat 4.7 A, DCR 65 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V4020-3R3M-R
    Inductance3.3 uH ±20%
    FLL minimum (at Isat)1.72 uH
    DCR typical @ +20 °C65 mOhm
    DCR maximum @ +20 °C72 mOhm
    Irms (DC, 40 °C rise)3.5 A
    Isat4.7 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Mechanical Drawing

    SDCL1V4020-3R3M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a semi-shielded SMD power inductor, characterised with both typical and maximum DCR and with separate Irms and Isat columns. The construction is aimed at converters where the board is compact but not densely packed with magnetics.

    At 3.5 A the winding dissipates about 0.796 W in copper using the typical DCR of 65 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 36.4 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4020 family this is value 5 of 8, in a range from 0.47 uH to 10 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products