Eaton SDCL1V4020-4R7M-R 4.7 uH SMD Inductor, Isat 4 A
Eaton SDCL1V4020-4R7M-R 4.7 uH SMD Inductor, Isat 4 A

Eaton SDCL1V4020-4R7M-R 4.7 uH SMD Inductor, Isat 4 A

Share
SDCL1V4020-4R7M-R: semi-shielded power inductor, 4.7 uH ±20%, 2.5 A Irms, Isat 4 A, DCR 95 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4020-4R7M-R 4.7 uH SMD Inductor, Isat 4 A

    SDCL1V4020-4R7M-R at a glance: semi-shielded power inductor, 4.7 uH ±20%, 2.5 A Irms, Isat 4 A, DCR 95 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V4020-4R7M-R
    Inductance4.7 uH ±20%
    FLL minimum (at Isat)2.44 uH
    DCR typical @ +20 °C95 mOhm
    DCR maximum @ +20 °C108 mOhm
    Irms (DC, 40 °C rise)2.5 A
    Isat4 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Mechanical Drawing

    SDCL1V4020-4R7M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Semi-shielded construction is a compromise that works: enough magnetic material around the coil to keep radiated emissions low, but an open enough structure to keep the DCR and the cost down. Common on consumer and industrial DC-DC rails.

    At 2.5 A the winding dissipates about 0.594 W in copper using the typical DCR of 95 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 37.6 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4020 family this is value 6 of 8, in a range from 0.47 uH to 10 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products