Eaton SDCL1V4030-680M-R 68 uH Power Inductor 980 mOhm
Eaton SDCL1V4030-680M-R 68 uH Power Inductor 980 mOhm

Eaton SDCL1V4030-680M-R 68 uH Power Inductor 980 mOhm

Share
SDCL1V4030-680M-R: semi-shielded power inductor, 68 uH ±20%, 0.5 A Irms, Isat 0.85 A, DCR 980 mOhm.
    • Product Details
    • Download

    Eaton SDCL1V4030-680M-R 68 uH Power Inductor 980 mOhm

    SDCL1V4030-680M-R at a glance: semi-shielded power inductor, 68 uH ±20%, 0.5 A Irms, Isat 0.85 A, DCR 980 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDCL1V4030-680M-R
    Inductance68 uH ±20%
    FLL minimum (at Isat)35.4 uH
    DCR typical @ +20 °C980 mOhm
    DCR maximum @ +20 °C1127 mOhm
    Irms (DC, 40 °C rise)0.5 A
    Isat0.85 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1032

    Outline Drawing

    SDCL1V4030-680M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1032: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 0.5 A the winding dissipates about 0.245 W in copper using the typical DCR of 980 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 24.6 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCL1V4030 family this is value 13 of 17, in a range from 0.68 uH to 470 uH.

    Where This Series Fits

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    How much shielding does semi-shielded give?
    Enough to damp the fringing field substantially, but less than a closed metal shield. For EMC-critical layouts check the radiated field against the test plan.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products