
| Parameter | Value |
|---|---|
| Orderable part number | SDQ12-1R0-R |
| Rated inductance | 1 uH |
| OCL, parallel | 0.81 uH |
| Irms, parallel | 2.49 A |
| Isat, parallel | 3.38 A |
| DCR, parallel typical | 40.3 mOhm |
| Volt-time, parallel | 3.15 V-us |
| OCL, series | 3.24 uH |
| Irms, series | 1.25 A |
| Isat, series | 1.69 A |
| DCR, series typical | 161 mOhm |
| Volt-time, series | 6.3 V-us |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4339 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data 4339; the package line above gives the body size where
the data sheet states it.
A dual winding shielded drum inductor: two identical windings on one drum core, wired in parallel for the low-inductance high-current rating or in series for four times the inductance at half the current.
Within the SDQ12 family this is item 3 of 15 in the Eaton catalogue.
The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.
How much coupling is there?
The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.
Is the part shielded?
Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.
Is the part shielded?
Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd