Eaton SDQ12-470-R Coupled Inductor, Parallel 47 uH
Eaton SDQ12-470-R Coupled Inductor, Parallel 47 uH

Eaton SDQ12-470-R Coupled Inductor, Parallel 47 uH

Share
SDQ12-470-R: dual winding shielded inductor, 47 uH.
    • Product Details
    • Download

    Eaton SDQ12-470-R Coupled Inductor, Parallel 47 uH

    SDQ12-470-R at a glance: dual winding shielded inductor, 47 uH.

    Key Specifications

    ParameterValue
    Orderable part numberSDQ12-470-R
    Rated inductance47 uH
    OCL, parallel47.6 uH
    Irms, parallel0.401 A
    Isat, parallel0.441 A
    DCR, parallel typical1.55 Ohm
    Volt-time, parallel24.1 V-us
    OCL, series190 uH
    Irms, series0.201 A
    Isat, series0.22 A
    DCR, series typical6.21 Ohm
    Volt-time, series48.3 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    This is the low-profile shielded version of the dual winding drum: the two windings are brought out to separate pads so they can be paralleled, series-connected or used as a 1:1 transformer.

    Within the SDQ12 family this is item 9 of 15 in the Eaton catalogue.

    Positioning in the Range

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message