
| Parameter | Value |
|---|---|
| Orderable part number | SDQ12-820-R |
| Rated inductance | 82 uH |
| OCL, parallel | 82.8 uH |
| Irms, parallel | 0.309 A |
| Isat, parallel | 0.334 A |
| DCR, parallel typical | 2.62 Ohm |
| Volt-time, parallel | 31.9 V-us |
| OCL, series | 331 uH |
| Irms, series | 0.154 A |
| Isat, series | 0.167 A |
| DCR, series typical | 10.5 Ohm |
| Volt-time, series | 63.7 V-us |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4339 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data 4339; the package line above gives the body size where
the data sheet states it.
This is the low-profile shielded version of the dual winding drum: the two windings are brought out to separate pads so they can be paralleled, series-connected or used as a 1:1 transformer.
Within the SDQ12 family this is item 13 of 15 in the Eaton catalogue.
The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.
Why two windings on one core?
So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.
Why two windings on one core?
So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.
What is the marking letter for?
It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd