Eaton SDQ25-101-R Coupled Inductor, Parallel 100 uH
Eaton SDQ25-101-R Coupled Inductor, Parallel 100 uH

Eaton SDQ25-101-R Coupled Inductor, Parallel 100 uH

Share
SDQ25-101-R: dual winding shielded inductor, 100 uH.
    • Product Details
    • Download

    Eaton SDQ25-101-R Coupled Inductor, Parallel 100 uH

    SDQ25-101-R at a glance: dual winding shielded inductor, 100 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ25-101-R
    Rated inductance100 uH
    OCL, parallel98.6 uH
    Irms, parallel0.499 A
    Isat, parallel0.405 A
    DCR, parallel typical1 Ohm
    Volt-time, parallel36.6 V-us
    OCL, series394 uH
    Irms, series0.249 A
    Isat, series0.203 A
    DCR, series typical4.02 Ohm
    Volt-time, series73.3 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    Coupled windings on a shielded drum are used for interleaved converters and for ripple cancellation, where the coupling is the point rather than a side effect.

    Within the SDQ25 family this is item 2 of 24 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message