Eaton SDQ25-150-R Dual Winding Inductor 15 uH
Eaton SDQ25-150-R Dual Winding Inductor 15 uH

Eaton SDQ25-150-R Dual Winding Inductor 15 uH

Share
SDQ25-150-R: dual winding shielded inductor, 15 uH.
    • Product Details
    • Download

    Eaton SDQ25-150-R Dual Winding Inductor 15 uH

    SDQ25-150-R at a glance: dual winding shielded inductor, 15 uH.

    Key Specifications

    ParameterValue
    Orderable part numberSDQ25-150-R
    Rated inductance15 uH
    OCL, parallel14.8 uH
    Irms, parallel1.24 A
    Isat, parallel1.05 A
    DCR, parallel typical163 mOhm
    Volt-time, parallel14.2 V-us
    OCL, series59.2 uH
    Irms, series0.619 A
    Isat, series0.523 A
    DCR, series typical653 mOhm
    Volt-time, series28.4 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    How to Read These Ratings

    A dual winding shielded drum inductor: two identical windings on one drum core, wired in parallel for the low-inductance high-current rating or in series for four times the inductance at half the current.

    Within the SDQ25 family this is item 4 of 24 in the Eaton catalogue.

    Where This Series Fits

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message