Eaton SDQ25-220-R Dual Winding Inductor 22 uH
Eaton SDQ25-220-R Dual Winding Inductor 22 uH

Eaton SDQ25-220-R Dual Winding Inductor 22 uH

Share
SDQ25-220-R: dual winding shielded inductor, 22 uH.
    • Product Details
    • Download

    Eaton SDQ25-220-R Dual Winding Inductor 22 uH

    SDQ25-220-R at a glance: dual winding shielded inductor, 22 uH.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSDQ25-220-R
    Rated inductance22 uH
    OCL, parallel22.5 uH
    Irms, parallel1.01 A
    Isat, parallel0.849 A
    DCR, parallel typical243 mOhm
    Volt-time, parallel17.5 V-us
    OCL, series89.9 uH
    Irms, series0.507 A
    Isat, series0.425 A
    DCR, series typical972 mOhm
    Volt-time, series35 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    How to Read These Ratings

    The shield closes the magnetic path around the drum, so the part can sit next to sensitive circuitry. The two windings share the core, which is what makes the parallel and series ratings differ by a factor of four rather than two.

    Within the SDQ25 family this is item 8 of 24 in the Eaton catalogue.

    What This Family Is For

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message