Eaton SDQ25-680-R Shielded Dual Winding Choke
Eaton SDQ25-680-R Shielded Dual Winding Choke

Eaton SDQ25-680-R Shielded Dual Winding Choke

Share
SDQ25-680-R: dual winding shielded inductor, 68 uH.
    • Product Details
    • Download

    Eaton SDQ25-680-R Shielded Dual Winding Choke

    SDQ25-680-R at a glance: dual winding shielded inductor, 68 uH.

    Specification Table

    ParameterValue
    Orderable part numberSDQ25-680-R
    Rated inductance68 uH
    OCL, parallel69.2 uH
    Irms, parallel0.603 A
    Isat, parallel0.484 A
    DCR, parallel typical686 mOhm
    Volt-time, parallel30.7 V-us
    OCL, series277 uH
    Irms, series0.302 A
    Isat, series0.242 A
    DCR, series typical2.75 Ohm
    Volt-time, series61.4 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    What the Numbers Mean

    A dual winding shielded drum inductor: two identical windings on one drum core, wired in parallel for the low-inductance high-current rating or in series for four times the inductance at half the current.

    Within the SDQ25 family this is item 17 of 24 in the Eaton catalogue.

    What This Family Is For

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    How much coupling is there?
    The windings share the drum, so coupling is tight – close to 1 for the intended configurations. That is why parallel connection halves the inductance instead of leaving it unchanged.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Why two windings on one core?
    So one part can be a high-current low-inductance choke or a lower-current higher-inductance one, and so the coupling can be used deliberately in interleaved converters.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message