Eaton SDQ25-821-R Shielded Dual Winding Choke
Eaton SDQ25-821-R Shielded Dual Winding Choke

Eaton SDQ25-821-R Shielded Dual Winding Choke

Share
SDQ25-821-R: dual winding shielded inductor, 820 uH.
    • Product Details
    • Download

    Eaton SDQ25-821-R Shielded Dual Winding Choke

    SDQ25-821-R at a glance: dual winding shielded inductor, 820 uH.

    Specification Table

    ParameterValue
    Orderable part numberSDQ25-821-R
    Rated inductance820 uH
    OCL, parallel824 uH
    Irms, parallel0.186 A
    Isat, parallel0.14 A
    DCR, parallel typical7.25 Ohm
    Volt-time, parallel106 V-us
    OCL, series3297 uH
    Irms, series0.093 A
    Isat, series0.07 A
    DCR, series typical29 Ohm
    Volt-time, series212 V-us
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4339

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data 4339; the package line above gives the body size where
    the data sheet states it.

    How to Read These Ratings

    The shield closes the magnetic path around the drum, so the part can sit next to sensitive circuitry. The two windings share the core, which is what makes the parallel and series ratings differ by a factor of four rather than two.

    Within the SDQ25 family this is item 21 of 24 in the Eaton catalogue.

    Positioning in the Range

    The SDQ range covers 0.47 uH to 1000 uH in parallel, low profile, shielded, with both windings on one drum.

    • Paralleling the windings halves the inductance. Confirm the connection before calculating ripple.
    • Typical applications: transformer: (1:1), sepic, flyback; buck, boost, coupled inductor; mobile phones; notebook and laptop power; digital cameras.
    • Design note: the marking letter is the inductance bin. Keep it visible on the assembly drawing.

    Frequently Asked Questions

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    What is the marking letter for?
    It identifies the inductance bin on the body, so a placed part can be checked against the bill of materials without measuring it.

    Is the part shielded?
    Yes, a shield sleeve closes the path around the drum. The external field is much lower than an open drum, which is what allows it to sit near other circuitry.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message