Eaton SS-5-2.5A-AP 2.5 A 250 Vac Time-Delay Subminiature Fuse
Eaton SS-5-2.5A-AP 2.5 A 250 Vac Time-Delay Subminiature Fuse

Eaton SS-5-2.5A-AP 2.5 A 250 Vac Time-Delay Subminiature Fuse

Share
Eaton SS-5-2.5A-AP is a 2.5 A 250 Vac time-delay subminiature radial fuse, 35 A breaking, 40.3 A2s I2t.
    • Product Details
    • Download

    Eaton SS-5-2.5A-AP 2.5 A 250 Vac Time-Delay Subminiature Fuse

    SS-5-2.5A-AP at a glance: time-delay subminiature fuse, 2.5 A at 250 Vac, 35 A interrupting, 74.5 mV drop (0.19 W), supplied -AP.

    Key Ratings

    ParameterValue
    Orderable part numberSS-5-2.5A-AP (-AP = 1,000 pcs ammo pack, 12.7 mm pitch)
    Current rating2.5 A
    Typical DC cold resistance24.3 mOhm
    CharacteristicTime-delay (T)
    Watts at rated current0.19 W
    Interrupting rating35 A at rated voltage, 50 Hz
    I2t, typical melting40.3 A2s
    Voltage rating250 Vac
    BodyRadial leaded, time-delay, rectangular, plastic cap and base, UL 94V0
    AgencyUL E19180 (JDYX2/JDYX8) / VDE 40015513 / CCC / KC / SEMKO / PSE+JET
    Typical voltage drop74.5 mV at rated current
    Design standardIEC 60127-3 sheet 4

    At 2.5 A

    • Board fit. Radial thru-hole, 5.08 mm lead spacing, plastic cap and base rated UL 94V0. It can go straight into the PCB or into a BK/PCS socket if field replacement matters.
    • Where the heat goes. Expect about 0.19 W at 2.5 A. The 24.3 mOhm figure is a 20 C measurement; in a sealed adapter the element runs hotter, so derate rather than assume.
    • Breaking. 35 A is low-breaking-capacity by design - it is a board-level part for primary and secondary protection inside equipment, not a panel fuse.
    • Surge budget. A 2 x 2.5 A, 5 ms pulse consumes 0.31 % of the 40.3 A2s melting integral. Repeated starts are fine at that level.
    • Above 2 A. At 2.5 A the element is thicker and the I2t climbs to 40.3 A2s. That is real inrush tolerance, but it also means the part protects the wiring rather than a semiconductor downstream.
    • Neighbours. One step down is SS-5-2A-AP at 2 A, one step up is SS-5-3.15A-AP at 3.15 A. I2t goes 29.8 to 67 A2s across that range, so the choice is an inrush-margin decision rather than a resolution one.

    Buying Notes

    • Order SS-5-2.5A-AP - -AP is 1,000 pieces in an ammo pack at 12.7 mm pitch. -BK is 200 in a polybag (4.3 mm leads), -BK2 200 with 21 mm leads.
    • Approvals: UL E19180 (JDYX2/JDYX8) / VDE 40015513 / CCC / KC / SEMKO / PSE+JET.
    • The purchasing code carries the packaging suffix; the bare part number is not a complete order line.
    • Same element as the cartridge equivalent in this current - only the termination differs.

    Questions Engineers Ask

    Is it halogen free?
    Yes, and RoHS compliant.

    Time-delay or fast-acting?
    Time-delay: it holds 1.5 In for a minute and rides through transformer inrush.

    Is the whole part number required?
    Yes. Eaton's ordering code includes the packaging suffix - the bare rating is not a complete order line.

    Design note: values are typical unless identified as ratings. Verify the current Eaton data sheet 2621 before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products