Eaton TL1011V2-R150-R 150 nH Trans-Inductor, Kps 0.96
Eaton TL1011V2-R150-R 150 nH Trans-Inductor, Kps 0.96

Eaton TL1011V2-R150-R 150 nH Trans-Inductor, Kps 0.96

Share
TL1011V2-R150-R: trans-inductor regulator coupled inductor, Lpri 150 nH, Lsec 150 nH, FLL 108 nH, Kps 0.96, Irms 70 A.
    • Product Details
    • Download

    Eaton TL1011V2-R150-R 150 nH Trans-Inductor, Kps 0.96

    TL1011V2-R150-R at a glance: trans-inductor regulator coupled inductor, Lpri 150 nH, Lsec 150 nH, FLL 108 nH, Kps 0.96, Irms 70 A.

    Specification Table

    ParameterValue
    Orderable part numberTL1011V2-R150-R
    Primary inductance Lpri (terminals 3-4)150 nH ±10%
    Secondary inductance Lsec (terminals 1-2)150 nH ±10%
    FLL minimum at Isat1108 nH
    DCR primary @ +20 °C0.6 mOhm
    DCR secondary @ +20 °C0.15 mOhm
    Irms secondary (40 °C rise)70 A
    Isat1 (20 % rolloff @ +25 °C)76 A
    Isat2 (20 % rolloff @ +100 °C)65 A
    Isat3 (20 % rolloff @ +125 °C)60 A
    K-factor (Bp-p = K x L x dI x 10^-3)340
    Coupling coefficient Kps0.96
    Package9.6 x 6.4 mm, 11.0 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1154

    Mechanical Drawing

    TL1011V2-R150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1154: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A trans-inductor regulator does not give each phase its own inductor and stop there. The secondary windings are tied into one series loop, so when a phase is driven, the loop forces every other phase to deliver current as well. The load step is shared before the controller has finished reacting.

    The secondary winding drops about 10.5 mV at its 70 A rating and dissipates roughly 0.735 W there. That is the loss the loop carries on top of the phase windings.

    The K-factor turns the applied ripple into a flux swing through Bp-p = K x L x delta-I, with L taken at the operating point. That amplitude, not the DC current, is what the core-loss curve is read against.

    With Kps at 0.96 the two windings share the flux almost completely; the fraction that does not link is what shows up as leakage inductance in the phase.

    Within the TL1011V2 family this is value 6 of 7, in a range from 70 to 170 nH.

    Where This Series Fits

    The TL and TLP families cover 70 nH to 200 nH of primary inductance in 9.6 x 6.4 mm, 10 x 6 mm and 12 x 6 mm bodies, with the secondary winding equal to the primary and a coupling coefficient between 0.91 and 0.95.

    • The secondary loop is part of the power stage. Layout inductance in that loop shows up directly as a slower transient, so keep the return path short and symmetric between phases.
    • Typical applications: multi-phase and vcore regulators; voltage regulator modules (vrms) and high power density vrms; server and desktop; central processing unit (cpu); graphics processing unit (gpu).
    • Design note: ripple from FLL, transient from Kps, loss from the primary DCR at the phase current. The secondary DCR only carries the difference current.

    Frequently Asked Questions

    Can I use this part as an ordinary inductor?
    Only if you leave the secondary open. With the secondary connected to the other phases the part is part of a loop and its effective inductance depends on what the rest of the loop is doing.

    What is a good coupling coefficient?
    Higher is better for transient response, but it also couples more of the ripple between phases. Values around 0.9 to 0.95 are typical; below about 0.85 the loop stops doing much work and the part behaves like a plain inductor with extra terminals.

    What is a good coupling coefficient?
    Higher is better for transient response, but it also couples more of the ripple between phases. Values around 0.9 to 0.95 are typical; below about 0.85 the loop stops doing much work and the part behaves like a plain inductor with extra terminals.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products