Eaton UP0.4C-390-R 39 uH Inductor, DCR 650 mOhm
Eaton UP0.4C-390-R 39 uH Inductor, DCR 650 mOhm

Eaton UP0.4C-390-R 39 uH Inductor, DCR 650 mOhm

Share
UP0.4C-390-R: UNI-PAC drum core power inductor, 39 uH ±20%, 0.59 A Irms, Isat 0.57 A, DCR 650 mOhm.
    • Product Details
    • Download

    Eaton UP0.4C-390-R 39 uH Inductor, DCR 650 mOhm

    UP0.4C-390-R at a glance: UNI-PAC drum core power inductor, 39 uH ±20%, 0.59 A Irms, Isat 0.57 A, DCR 650 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberUP0.4C-390-R
    OCL (open circuit inductance)39 uH ±20%
    Irms (40 °C rise, no core loss)0.59 A
    Isat (peak, rolloff per data sheet)0.57 A
    DCR typical @ +20 °C650 mOhm
    Package6.6 x 4.45 mm, 2.92 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4107

    Mechanical Drawing

    UP0.4C-390-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4107: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The construction is one piece – drum, winding, terminations – which is why the family reaches 1000 uH in a package a few millimetres across while staying a surface-mount part. Values below 1 uH and above 500 uH sit in the same body size.

    Copper loss at the 0.59 A rating is about 0.226 W with the typical DCR of 650 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 6.34 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP0.4C family this is value 12 of 15, in a range from 1.16 to 102 uH.

    What This Family Is For

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: handheld/portable devices; computers and peripherals; gaming machines/consoles; dc-dc converters; power supplies.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message