Eaton UP0.4C-6R8-R 7.06 uH Drum Core Inductor, 1.3 A
Eaton UP0.4C-6R8-R 7.06 uH Drum Core Inductor, 1.3 A

Eaton UP0.4C-6R8-R 7.06 uH Drum Core Inductor, 1.3 A

Share
UP0.4C-6R8-R: UNI-PAC drum core power inductor, 7.06 uH ±20%, 1.3 A Irms, Isat 1.35 A, DCR 128 mOhm.
    • Product Details
    • Download

    Eaton UP0.4C-6R8-R 7.06 uH Drum Core Inductor, 1.3 A

    UP0.4C-6R8-R at a glance: UNI-PAC drum core power inductor, 7.06 uH ±20%, 1.3 A Irms, Isat 1.35 A, DCR 128 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberUP0.4C-6R8-R
    OCL (open circuit inductance)7.06 uH ±20%
    Irms (40 °C rise, no core loss)1.3 A
    Isat (peak, rolloff per data sheet)1.35 A
    DCR typical @ +20 °C128 mOhm
    Package6.6 x 4.45 mm, 2.92 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4107

    Mechanical Drawing

    UP0.4C-6R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4107: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.

    Copper loss at the 1.3 A rating is about 0.216 W with the typical DCR of 128 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 6.43 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP0.4C family this is value 6 of 15, in a range from 1.16 to 102 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: handheld/portable devices; computers and peripherals; gaming machines/consoles; dc-dc converters; power supplies.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products