Eaton UP1B-150-R 15 uH Inductor, DCR 175 mOhm
Eaton UP1B-150-R 15 uH Inductor, DCR 175 mOhm

Eaton UP1B-150-R 15 uH Inductor, DCR 175 mOhm

Share
UP1B-150-R: UNI-PAC drum core power inductor, 15 uH ±20%, 1.2 A Irms, Isat 1.5 A, DCR 175 mOhm.
    • Product Details
    • Download

    Eaton UP1B-150-R 15 uH Inductor, DCR 175 mOhm

    UP1B-150-R at a glance: UNI-PAC drum core power inductor, 15 uH ±20%, 1.2 A Irms, Isat 1.5 A, DCR 175 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberUP1B-150-R
    Rated inductance15 uH ±20%
    OCL (open circuit inductance)16 uH ±20%
    Irms (40 °C rise, no core loss)1.2 A
    Isat (peak, rolloff per data sheet)1.5 A
    DCR typical @ +20 °C175 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Dimensions and Pad Layout

    UP1B-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.

    Copper loss at the 1.2 A rating is about 0.252 W with the typical DCR of 175 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 16.9 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP1B family this is value 9 of 17, in a range from 0.47 to 330 uH.

    Series Positioning

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message