Eaton UP1B-3R3-R 3.3 uH Inductor, DCR 42.8 mOhm
Eaton UP1B-3R3-R 3.3 uH Inductor, DCR 42.8 mOhm

Eaton UP1B-3R3-R 3.3 uH Inductor, DCR 42.8 mOhm

Share
UP1B-3R3-R: UNI-PAC drum core power inductor, 3.3 uH ±20%, 2.9 A Irms, Isat 3 A, DCR 42.8 mOhm.
    • Product Details
    • Download

    Eaton UP1B-3R3-R 3.3 uH Inductor, DCR 42.8 mOhm

    UP1B-3R3-R at a glance: UNI-PAC drum core power inductor, 3.3 uH ±20%, 2.9 A Irms, Isat 3 A, DCR 42.8 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP1B-3R3-R
    Rated inductance3.3 uH ±20%
    OCL (open circuit inductance)3.79 uH ±20%
    Irms (40 °C rise, no core loss)2.9 A
    Isat (peak, rolloff per data sheet)3 A
    DCR typical @ +20 °C42.8 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Outline Drawing

    UP1B-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 2.9 A rating is about 0.36 W with the typical DCR of 42.8 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 14.8 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP1B family this is value 5 of 17, in a range from 0.47 to 330 uH.

    Series Positioning

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products