Eaton UP2.8B-151-R 150 uH SMT Drum Core Choke, Isat 0.74 A
Eaton UP2.8B-151-R 150 uH SMT Drum Core Choke, Isat 0.74 A

Eaton UP2.8B-151-R 150 uH SMT Drum Core Choke, Isat 0.74 A

Share
UP2.8B-151-R: UNI-PAC drum core power inductor, 150 uH ±20%, 0.62 A Irms, Isat 0.74 A, DCR 971 mOhm.
    • Product Details
    • Download

    Eaton UP2.8B-151-R 150 uH SMT Drum Core Choke, Isat 0.74 A

    UP2.8B-151-R at a glance: UNI-PAC drum core power inductor, 150 uH ±20%, 0.62 A Irms, Isat 0.74 A, DCR 971 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberUP2.8B-151-R
    OCL (open circuit inductance)150 uH ±20%
    Irms (40 °C rise, no core loss)0.62 A
    Isat (peak, rolloff per data sheet)0.74 A
    DCR typical @ +20 °C971 mOhm
    Package9.4 x 9.4 mm, 2.8 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4106

    Outline Drawing

    UP2.8B-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4106: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 0.62 A rating is about 0.373 W with the typical DCR of 971 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 41.1 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2.8B family this is value 14 of 14, in a range from 0.98 to 150 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: dc-dc converters; filter inductors; signal conditioning; energy storage applications; computer and battery powered equipment.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products