
| Parameter | Value |
|---|---|
| Orderable part number | UP2.8B-220-R |
| OCL (open circuit inductance) | 22 uH ±20% |
| Irms (40 °C rise, no core loss) | 1.5 A |
| Isat (peak, rolloff per data sheet) | 1.7 A |
| DCR typical @ +20 °C | 190 mOhm |
| Package | 9.4 x 9.4 mm, 2.8 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4106 |

Drawing reproduced from Eaton Technical Data 4106: outline views
with rated mm dimensions, pad layout and marking.
A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.
Copper loss at the 1.5 A rating is about 0.427 W with the typical DCR of 190 mOhm. Ripple current adds to that through the AC resistance.
The core holds about 31.8 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.
Within the UP2.8B family this is value 9 of 14, in a range from 0.98 to 150 uH.
The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.
How far does the field reach?
The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.
Why is DCR quoted in ohms on some of these data sheets?
Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.
How far does the field reach?
The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd