Eaton UP2B-221-R 220 uH Inductor, DCR 672 mOhm
Eaton UP2B-221-R 220 uH Inductor, DCR 672 mOhm

Eaton UP2B-221-R 220 uH Inductor, DCR 672 mOhm

Share
UP2B-221-R: UNI-PAC drum core power inductor, 220 uH ±20%, 0.773 A Irms, Isat 0.637 A, DCR 672 mOhm.
    • Product Details
    • Download

    Eaton UP2B-221-R 220 uH Inductor, DCR 672 mOhm

    UP2B-221-R at a glance: UNI-PAC drum core power inductor, 220 uH ±20%, 0.773 A Irms, Isat 0.637 A, DCR 672 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP2B-221-R
    Rated inductance220 uH ±20%
    OCL (open circuit inductance)223 uH ±20%
    Irms (40 °C rise, no core loss)0.773 A
    Isat (peak, rolloff per data sheet)0.637 A
    DCR typical @ +20 °C672 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Outline Drawing

    UP2B-221-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 0.773 A rating is about 0.401 W with the typical DCR of 672 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 44.6 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP2B family this is value 17 of 22, in a range from 0.47 to 1000 uH.

    Where This Series Fits

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    How far does the field reach?
    The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message