Eaton UP2C-1R5-R 1.5 uH Drum Core Inductor, 8.1 A
Eaton UP2C-1R5-R 1.5 uH Drum Core Inductor, 8.1 A

Eaton UP2C-1R5-R 1.5 uH Drum Core Inductor, 8.1 A

Share
UP2C-1R5-R at a glance (discontinued): UNI-PAC drum core power inductor, 1.5 uH ±20%, 8.1 A Irms, Isat 10 A, DCR 5.6 mOhm.
    • Product Details
    • Download

    Eaton UP2C-1R5-R 1.5 uH Drum Core Inductor, 8.1 A

    UP2C-1R5-R at a glance (discontinued): UNI-PAC drum core power inductor, 1.5 uH ±20%, 8.1 A Irms, Isat 10 A, DCR 5.6 mOhm.

    End of life: Eaton marks the UP2C series discontinued effective 30 November 2017 with no direct replacement; the data sheet points to UP2UC as the alternate. Not for new designs.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP2C-1R5-R
    Rated inductance1.5 uH ±20%
    OCL (open circuit inductance)1.45 uH ±20%
    Irms (40 °C rise, no core loss)8.1 A
    Isat (peak, rolloff per data sheet)10 A
    DCR typical @ +20 °C5.6 mOhm
    Volt-time rating8.3 V-us
    Package12.9 x 9.4 mm, 5.2 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4111

    Mechanical Drawing

    UP2C-1R5-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4111: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 8.1 A rating is about 0.367 W with the typical DCR of 5.6 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 75 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    The 8.3 V-us volt-time rating sets the maximum flux excursion per switching cycle; at 100 kHz that is 830 V of applied voltage for a full period.

    Within the UP2C family this is value 3 of 20, in a range from 0.47 to 1000 uH.

    What This Family Is For

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: desktop computer; workstations/servers; dvd players; portable power devices; base stations.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products