Eaton UP2C-681-R 680 uH Drum Core Inductor, 0.46 A
Eaton UP2C-681-R 680 uH Drum Core Inductor, 0.46 A

Eaton UP2C-681-R 680 uH Drum Core Inductor, 0.46 A

Share
UP2C-681-R at a glance (discontinued): UNI-PAC drum core power inductor, 680 uH ±20%, 0.46 A Irms, Isat 0.48 A, DCR 1774 mOhm.
    • Product Details
    • Download

    Eaton UP2C-681-R 680 uH Drum Core Inductor, 0.46 A

    UP2C-681-R at a glance (discontinued): UNI-PAC drum core power inductor, 680 uH ±20%, 0.46 A Irms, Isat 0.48 A, DCR 1774 mOhm.

    End of life: Eaton marks the UP2C series discontinued effective 30 November 2017 with no direct replacement; the data sheet points to UP2UC as the alternate. Not for new designs.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP2C-681-R
    Rated inductance680 uH ±20%
    OCL (open circuit inductance)690 uH ±20%
    Irms (40 °C rise, no core loss)0.46 A
    Isat (peak, rolloff per data sheet)0.48 A
    DCR typical @ +20 °C1774 mOhm
    Volt-time rating173 V-us
    Package12.9 x 9.4 mm, 5.2 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4111

    Outline Drawing

    UP2C-681-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4111: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.

    Copper loss at the 0.46 A rating is about 0.375 W with the typical DCR of 1774 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 78.3 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    The 173 V-us volt-time rating sets the maximum flux excursion per switching cycle; at 100 kHz that is 17300 V of applied voltage for a full period.

    Within the UP2C family this is value 19 of 20, in a range from 0.47 to 1000 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: desktop computer; workstations/servers; dvd players; portable power devices; base stations.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products