
| Parameter | Value |
|---|---|
| Orderable part number | UP2UC-2R2-R |
| OCL (open circuit inductance) | 2.2 uH ±20% |
| Irms (40 °C rise, no core loss) | 6.1 A |
| Isat (peak, rolloff per data sheet) | 7 A |
| DCR typical @ +20 °C | 5.8 mOhm |
| DCR maximum @ +20 °C | 12 mOhm |
| SRF typical | 80 MHz |
| K-factor | 130 |
| Package | 12.7 x 9.3 mm, 5.21 mm high |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4369 |

Drawing reproduced from Eaton Technical Data 4369: outline views
with rated mm dimensions, pad layout and marking.
This is a drum core choke chosen for DC-DC converters, filters and bias supplies where the board has room and the field is not the limiting factor. Irms is the thermal limit, Isat the magnetic one, and on the higher values the core saturates long before the winding overheats.
Copper loss at the 6.1 A rating is about 0.216 W with the typical DCR of 5.8 mOhm. Ripple current adds to that through the AC resistance.
The core holds about 53.9 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.
Within the UP2UC family this is value 3 of 19, in a range from 1 to 1000 uH.
The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.
Can the part be used in a buck converter?
Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.
How far does the field reach?
The drum is open at both ends, so the field leaves along the axis and returns around the body. Keep traces and vias out from under the part and keep sensitive nodes off the axis. A shielded part is the answer when that is not possible.
Is the saturation current defined at 20 % or 30 % rolloff?
It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd