Eaton UP3B-2R2-R 2.2 uH Inductor, DCR 7.4 mOhm
Eaton UP3B-2R2-R 2.2 uH Inductor, DCR 7.4 mOhm

Eaton UP3B-2R2-R 2.2 uH Inductor, DCR 7.4 mOhm

Share
UP3B-2R2-R: UNI-PAC drum core power inductor, 2.2 uH ±20%, 9.2 A Irms, Isat 10.2 A, DCR 7.4 mOhm.
    • Product Details
    • Download

    Eaton UP3B-2R2-R 2.2 uH Inductor, DCR 7.4 mOhm

    UP3B-2R2-R at a glance: UNI-PAC drum core power inductor, 2.2 uH ±20%, 9.2 A Irms, Isat 10.2 A, DCR 7.4 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberUP3B-2R2-R
    Rated inductance2.2 uH ±20%
    OCL (open circuit inductance)3.01 uH ±20%
    Irms (40 °C rise, no core loss)9.2 A
    Isat (peak, rolloff per data sheet)10.2 A
    DCR typical @ +20 °C7.4 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Mechanical Drawing

    UP3B-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 9.2 A rating is about 0.626 W with the typical DCR of 7.4 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 114 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP3B family this is value 4 of 16, in a range from 0.47 to 330 uH.

    What This Family Is For

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Why is DCR quoted in ohms on some of these data sheets?
    Because the values are large: a 1000 uH part can be several ohms. The table on this page converts the figure to milliohm so it can be compared directly with the rest of the family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products