Eaton UP4B-100-R 10 uH Drum Core Inductor, 6.8 A
Eaton UP4B-100-R 10 uH Drum Core Inductor, 6.8 A

Eaton UP4B-100-R 10 uH Drum Core Inductor, 6.8 A

Share
UP4B-100-R: UNI-PAC drum core power inductor, 10 uH ±20%, 6.8 A Irms, Isat 11.5 A, DCR 15 mOhm.
    • Product Details
    • Download

    Eaton UP4B-100-R 10 uH Drum Core Inductor, 6.8 A

    UP4B-100-R at a glance: UNI-PAC drum core power inductor, 10 uH ±20%, 6.8 A Irms, Isat 11.5 A, DCR 15 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP4B-100-R
    Rated inductance10 uH ±20%
    OCL (open circuit inductance)9.77 uH ±20%
    Irms (40 °C rise, no core loss)6.8 A
    Isat (peak, rolloff per data sheet)11.5 A
    DCR typical @ +20 °C15 mOhm
    PackageFour body sizes in this data sheet – see drawing
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4308

    Mechanical Drawing

    UP4B-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data DS4308: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    Drum core parts are the traditional answer to “I need a few microhenry at a few amps and I do not want to pay for a shielded part”. The open magnetic path gives a soft saturation curve, so the inductance falls away gradually rather than collapsing at the knee.

    Copper loss at the 6.8 A rating is about 0.694 W with the typical DCR of 15 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 661 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP4B family this is value 8 of 18, in a range from 0.47 to 470 uH.

    Series Positioning

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; workstations/servers; desktop computer; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Can the part be used in a buck converter?
    Yes, within its current and frequency range. Check the core-loss curve at the switching frequency and the ripple before treating the DC rating as the limit.

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products