Eaton UP5-1R0-R 1 uH UNI-PAC Power Inductor
Eaton UP5-1R0-R 1 uH UNI-PAC Power Inductor

Eaton UP5-1R0-R 1 uH UNI-PAC Power Inductor

Share
UP5-1R0-R: UNI-PAC drum core power inductor, 1 uH ±20%, 8.6 A Irms, Isat 20 A, DCR 9 mOhm.
    • Product Details
    • Download

    Eaton UP5-1R0-R 1 uH UNI-PAC Power Inductor

    UP5-1R0-R at a glance: UNI-PAC drum core power inductor, 1 uH ±20%, 8.6 A Irms, Isat 20 A, DCR 9 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberUP5-1R0-R
    OCL (open circuit inductance)1 uH ±20%
    Irms (40 °C rise, no core loss)8.6 A
    Isat (peak, rolloff per data sheet)20 A
    DCR typical @ +20 °C9 mOhm
    SRF typical140 MHz
    K-factor73.6
    Package18.54 x 15.24 mm, 7.11 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4409

    Mechanical Dimensions & Pad Layout

    UP5-1R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4409: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A UNI-PAC drum core inductor is a wound coil on a ferrite drum with the winding brought out to two solder pads. There is no shield, so the field leaves the part along the drum axis. That is the trade: the most inductance per millimetre and per cent, paid for with a radiated field.

    Copper loss at the 8.6 A rating is about 0.666 W with the typical DCR of 9 mOhm. Ripple current adds to that through the AC resistance.

    The core holds about 200 uJ at the saturation point, which is the energy available to bridge a load step before the inductance collapses.

    Within the UP5 family this is value 1 of 18, in a range from 1 to 1000 uH.

    Positioning in the Range

    The UP family runs from 0.47 uH to 1000 uH in bodies from 6.6 x 4.45 mm up to 18.54 x 15.24 mm, all unshielded drum core, all with the saturation and thermal ratings quoted separately.

    • Unshielded. Do not route traces or vias underneath the body, and keep the drum axis away from sensitive nodes and from any magnetic sensor.
    • Typical applications: buck or boost inductor; desktop computer; workstations/servers; dvd players; portable power devices.
    • Design note: on the high-value rows the core saturates well before the winding reaches its thermal limit. Size against Isat for those values.

    Frequently Asked Questions

    Is the saturation current defined at 20 % or 30 % rolloff?
    It varies by data sheet. The rolloff point is stated in the note under the table of each document; the number on this page is the one printed for this part, not a normalised figure.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Why does the inductance fall so gradually with current?
    The drum has a distributed air gap along its length, so the core saturates progressively instead of all at once. That soft knee is why drum core parts stay usable slightly beyond the quoted saturation point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products