Eaton WCL2520-560-R 56 uH Inductor, 55 mA Rated
Eaton WCL2520-560-R 56 uH Inductor, 55 mA Rated

Eaton WCL2520-560-R 56 uH Inductor, 55 mA Rated

Share
WCL2520-560-R: wire wound chip inductor, 56 uH ±5%, Q 10 at 2.52 MHz, 55 mA rated, DCR 6000 mOhm.
    • Product Details
    • Download

    Eaton WCL2520-560-R 56 uH Inductor, 55 mA Rated

    WCL2520-560-R at a glance: wire wound chip inductor, 56 uH ±5%, Q 10 at 2.52 MHz, 55 mA rated, DCR 6000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberWCL2520-560-R
    OCL56 uH ±5%
    Q minimum @ test frequency10 @ 2.52 MHz
    SRF minimum6.5 MHz
    DCR maximum @ +25 °C6000 mOhm
    Rated current (20 °C rise)55 mA
    OCL test frequency2.52 MHz
    OCL test voltage500 mV
    Package2.92 x 2.79 mm, 2.10 mm high
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10930

    Mechanical Dimensions & Pad Layout

    WCL2520-560-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10930: outline views
    with rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The value is small and the current is modest, so the design question is not saturation but Q and self-resonance. Q is quoted at one test frequency and SRF is the point where the winding capacitance takes over; both have to be read against the band the part actually works in.

    At the 55 mA rating the winding drops about 330 mV and dissipates 18.2 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 10 at 2.52 MHz with self-resonance at 6.5 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCL2520 family this is value 27 of 33, in a range from 0.12 to 220 uH.

    Series Positioning

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: industrial connectivity (iot); computing/gaming consoles; smart meters; industrial equipment; machine-to-machine (m2m).
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Can I place it with a standard chip shooter?
    Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products