Eaton WCLA1005V1-2R9-R 2.9 nH Inductor, 400 mA Rated
Eaton WCLA1005V1-2R9-R 2.9 nH Inductor, 400 mA Rated

Eaton WCLA1005V1-2R9-R 2.9 nH Inductor, 400 mA Rated

Share
WCLA1005V1-2R9-R: wire wound chip inductor, 2.9 nH ±10%, Q 8 at 250 MHz, 400 mA rated, DCR 300 mOhm.
    • Product Details
    • Download

    Eaton WCLA1005V1-2R9-R 2.9 nH Inductor, 400 mA Rated

    WCLA1005V1-2R9-R at a glance: wire wound chip inductor, 2.9 nH ±10%, Q 8 at 250 MHz, 400 mA rated, DCR 300 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberWCLA1005V1-2R9-R
    OCL2.9 nH ±10%
    Q minimum @ test frequency8 @ 250 MHz
    SRF minimum6000 MHz
    DCR maximum @ +25 °C300 mOhm
    Rated current (20 °C rise)400 mA
    OCL test frequency250 MHz
    OCL test voltage500 mV
    Package1.19 x 0.66 mm, 0.60 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10981

    Mechanical Dimensions & Pad Layout

    WCLA1005V1-2R9-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10981: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a wire wound chip inductor for RF and small-signal circuits: tight tolerance, defined Q, and a rated current that is set by a 20 °C self-temperature rise rather than by saturation.

    At the 400 mA rating the winding drops about 120 mV and dissipates 48 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 8 at 250 MHz with self-resonance at 6000 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA1005V1 family this is value 10 of 52, in a range from 1 to 120 nH.

    Positioning in the Range

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message