Eaton WCLA1608V1-8R2-R 8.2 nH Chip Inductor, Q 28
Eaton WCLA1608V1-8R2-R 8.2 nH Chip Inductor, Q 28

Eaton WCLA1608V1-8R2-R 8.2 nH Chip Inductor, Q 28

Share
WCLA1608V1-8R2-R: wire wound chip inductor, 8.2 nH ±5%, Q 28 at 250 MHz, 700 mA rated, DCR 120 mOhm.
    • Product Details
    • Download

    Eaton WCLA1608V1-8R2-R 8.2 nH Chip Inductor, Q 28

    WCLA1608V1-8R2-R at a glance: wire wound chip inductor, 8.2 nH ±5%, Q 28 at 250 MHz, 700 mA rated, DCR 120 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberWCLA1608V1-8R2-R
    OCL8.2 nH ±5%
    Q minimum @ test frequency28 @ 250 MHz
    SRF minimum4700 MHz
    DCR maximum @ +25 °C120 mOhm
    Rated current (20 °C rise)700 mA
    OCL test frequency250 MHz
    OCL test voltage500 mV
    Package1.78 x 1.10 mm, 0.95 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10982

    Mechanical Dimensions & Pad Layout

    WCLA1608V1-8R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10982: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a wire wound chip inductor for RF and small-signal circuits: tight tolerance, defined Q, and a rated current that is set by a 20 °C self-temperature rise rather than by saturation.

    At the 700 mA rating the winding drops about 84 mV and dissipates 58.8 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 28 at 250 MHz with self-resonance at 4700 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA1608V1 family this is value 10 of 31, in a range from 1.6 to 470 nH.

    What This Family Is For

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products