Eaton WCLA2012V1-121-R 120 nH Inductor, 400 mA Rated
Eaton WCLA2012V1-121-R 120 nH Inductor, 400 mA Rated

Eaton WCLA2012V1-121-R 120 nH Inductor, 400 mA Rated

Share
WCLA2012V1-121-R: wire wound chip inductor, 120 nH ±5%, Q 45 at 250 MHz, 400 mA rated, DCR 510 mOhm.
    • Product Details
    • Download

    Eaton WCLA2012V1-121-R 120 nH Inductor, 400 mA Rated

    WCLA2012V1-121-R at a glance: wire wound chip inductor, 120 nH ±5%, Q 45 at 250 MHz, 400 mA rated, DCR 510 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberWCLA2012V1-121-R
    OCL120 nH ±5%
    Q minimum @ test frequency45 @ 250 MHz
    SRF minimum1100 MHz
    DCR maximum @ +25 °C510 mOhm
    Rated current (20 °C rise)400 mA
    OCL test frequency150 MHz
    OCL test voltage500 mV
    Package2.30 x 1.70 mm, 1.52 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10983

    Outline Drawing

    WCLA2012V1-121-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10983: outline views
    with rated mm dimensions, pad layout and marking.

    The Figures Explained

    Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.

    At the 400 mA rating the winding drops about 204 mV and dissipates 81.6 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 45 at 250 MHz with self-resonance at 1100 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA2012V1 family this is value 21 of 36, in a range from 2.2 to 2200 nH.

    What This Family Is For

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    What does the rated current mean here?
    It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Can I place it with a standard chip shooter?
    Yes, the body and terminals are dimensioned for tape and reel and standard nozzle placement. Check the terminal width against the pad geometry in the drawing.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products