Eaton WCLA2012V1-122-R 1200 nH Inductor, 170 mA Rated
Eaton WCLA2012V1-122-R 1200 nH Inductor, 170 mA Rated

Eaton WCLA2012V1-122-R 1200 nH Inductor, 170 mA Rated

Share
WCLA2012V1-122-R: wire wound chip inductor, 1200 nH ±5%, Q 18 at 50 MHz, 170 mA rated, DCR 2550 mOhm.
    • Product Details
    • Download

    Eaton WCLA2012V1-122-R 1200 nH Inductor, 170 mA Rated

    WCLA2012V1-122-R at a glance: wire wound chip inductor, 1200 nH ±5%, Q 18 at 50 MHz, 170 mA rated, DCR 2550 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberWCLA2012V1-122-R
    OCL1200 nH ±5%
    Q minimum @ test frequency18 @ 50 MHz
    SRF minimum180 MHz
    DCR maximum @ +25 °C2550 mOhm
    Rated current (20 °C rise)170 mA
    OCL test frequency7.9 MHz
    OCL test voltage500 mV
    Package2.30 x 1.70 mm, 1.52 mm high
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10983

    Mechanical Dimensions & Pad Layout

    WCLA2012V1-122-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10983: outline views
    with rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.

    At the 170 mA rating the winding drops about 434 mV and dissipates 73.7 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.

    Q of 18 at 50 MHz with self-resonance at 180 MHz puts the useful band comfortably below the point where the winding capacitance takes over.

    Within the WCLA2012V1 family this is value 33 of 36, in a range from 2.2 to 2200 nH.

    What This Family Is For

    The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.

    • The rated current is a 20 °C rise figure, not a saturation limit. In a DC bias application check the inductance at the actual bias before sizing the filter.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: read Q and SRF at the frequency the part works at, not at the test frequency printed in the table.

    Frequently Asked Questions

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    How is Q specified?
    At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.

    Is the automotive version electrically different?
    The construction is the same; the qualification and the temperature range are not. The WCLA parts are AEC-Q200 qualified and rated to +125 °C, the commercial WCL parts to +85 °C.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products