
| Parameter | Value |
|---|---|
| Orderable part number | WCLA2520V1-150-R |
| OCL | 15 uH ±10% |
| Q minimum @ test frequency | 12 @ 2.52 MHz |
| SRF minimum | 21 MHz |
| DCR maximum @ +25 °C | 1090 mOhm |
| Rated current (20 °C rise) | 342 mA |
| OCL test frequency | 2.52 MHz |
| OCL test voltage | 500 mV |
| Package | 2.90 x 2.50 mm, 2.10 mm high |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1152 |

Drawing reproduced from Eaton Technical Data ELX1152: outline views
with rated mm dimensions, pad layout and marking.
Ceramic-core wire wound parts hold their value well with DC bias because there is no magnetic material to saturate. Ferrite-core versions give more inductance per size but start to roll off as the bias current rises.
At the 342 mA rating the winding drops about 373 mV and dissipates 127 mW. Both are small enough to ignore in a bias network but not in a high-Q filter.
Q of 12 at 2.52 MHz with self-resonance at 21 MHz puts the useful band comfortably below the point where the winding capacitance takes over.
Within the WCLA2520V1 family this is value 10 of 13, in a range from 0.22 to 47 uH.
The WCL and WCLA families run from 1.0 nH in a 1.19 x 0.66 mm body to 560 uH in 3.5 x 2.9 mm, with Q quoted at a stated test frequency for every row.
How is Q specified?
At one test frequency, given in the table. Q falls away either side of that point, so a part quoted at 25 MHz tells you little about behaviour at 900 MHz.
Why choose wire wound over multilayer?
Q. A wound coil has lower resistance for the same inductance, so Q is higher and the loss in a filter or matching network is lower. The price is size and cost, which is why multilayer parts dominate pure decoupling.
What does the rated current mean here?
It is the current that produces a 20 °C self-temperature rise, not a saturation limit. On a ceramic-core part there is no saturation to speak of, so the thermal figure is the only limit.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd